#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.531.2.19 2011/10/11 04:40:06 delphij Exp $

#cpu		I486_CPU
#cpu		I586_CPU
cpu		I686_CPU
ident		twixt

# To statically compile in device wiring instead of /boot/device.hints
#hints		"GENERIC.hints"		# Default places to look for devices.

# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env		"GENERIC.env"

makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols

options 	SCHED_ULE		# ULE scheduler
options 	PREEMPTION		# Enable kernel thread preemption
options 	INET			# InterNETworking
#options 	INET6			# IPv6 communications protocols
#options 	SCTP			# Stream Control Transmission Protocol
options 	FFS			# Berkeley Fast Filesystem
options 	SOFTUPDATES		# Enable FFS soft updates support
#options 	UFS_ACL			# Support for access control lists
options 	UFS_DIRHASH		# Improve performance on big directories
#options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
#options 	UFS_EXTATTR
#options 	UFS_EXTATTR_AUTOSTART
#options 	DIRECTIO
#options 	QUOTA			# enable disk quotas
options 	MD_ROOT			# MD is a potential root device
options 	NFSCLIENT		# Network Filesystem Client
#options 	NFSSERVER		# Network Filesystem Server
options 	NFSLOCKD		# Network Lock Manager
options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
#options 	NULLFS			# NULL filesystem
#options 	MSDOSFS			# MSDOS Filesystem
#options 	CD9660			# ISO 9660 Filesystem
#options 	PROCFS			# Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		# Pseudo-filesystem framework
options 	GEOM_PART_GPT		# GUID Partition Tables.
options 	GEOM_LABEL		# Provides labelization
options 	GEOM_MBR		# DOS/MBR partitioning
options 	COMPAT_43TTY		# BSD 4.3 TTY compat (sgtty)
options 	COMPAT_AOUT		# Enable i386 a.out binary support
#options 	COMPAT_LINUX		# Enable Linux ABI emulation
#options 	LINPROCFS		# Enable the linux-like proc filesystem support
#options 	LINSYSFS		# Enable the linux-like sys filesystem support
#options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
#options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
#options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
#options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
options 	KTRACE			# ktrace(1) support
#options 	STACK			# stack(9) support
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	P1003_1B_MQUEUE		# POSIX message queue
options 	P1003_1B_SEMAPHORES	# POSIX-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
options 	AUDIT			# Security event auditing
#options 	MAC			# TrustedBSD MAC Framework
#options 	FLOWTABLE		# per-cpu routing cache
#options 	KDTRACE_HOOKS		# Kernel DTrace hooks
options 	INCLUDE_CONFIG_FILE	# Include this file in kernel
options 	MYLOOP_MASKLEN=24
#options 	IPSEC			# IP security (requires device crypto)
device		crypto			# core crypto support
#options 	IPSEC_NAT_T		# NAT-T support, UDP encap of ESP
#options 	LIBMCHAIN
#options 	NETGRAPH		# netgraph(4) system
options 	ZERO_COPY_SOCKETS

# To make an SMP kernel, the next two lines are needed
options 	SMP			# Symmetric MultiProcessor Kernel
device		apic			# I/O APIC

# CPU frequency control
device		cpufreq

# Provide read/write access to the memory in the clock chip.
device		nvram			# Access to rtc cmos via /dev/nvram

# Bus support.
device		acpi
device		pci

# ATA and ATAPI devices
device		ata
device		atadisk		# ATA disk drives
#device		ataraid		# ATA RAID drives
#device		atapicd		# ATAPI CDROM drives
#device		atapifd		# ATAPI floppy drives
#device		atapist		# ATAPI tape drives
options 	ATA_STATIC_ID	# Static device numbering
device		atapicam	# emulate ATAPI devices as SCSI ditto via CAM
				# needs CAM to be present (scbus & pass)
device		ahci

# SCSI peripherals
device		scbus		# SCSI bus (required for SCSI)
device		ch		# SCSI media changers
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)
device		ses		# SCSI Environmental Services (and SAF-TE)
device		pt		# SCSI processor
device		targ		# SCSI Target Mode Code
device		targbh		# SCSI Target Mode Blackhole Device
device		sg		# Linux SCSI passthrough

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		kbdmux		# keyboard multiplexer

device		vga		# VGA video card driver
options 	VGA_WIDTH90	# support 90 column modes
device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc
options 	MAXCONS=16	# number of virtual consoles
options 	MSGBUF_SIZE=262144
options 	SC_HISTORY_SIZE=2118	# number of history buffer lines
options 	SC_MOUSE_CHAR=0x3	# char code for text mode mouse cursor
options 	SC_PIXEL_MODE		# add support for the raster text mode

# The following options will let you change the default colors of syscons.
options 	SC_NORM_ATTR=(FG_BROWN|BG_BLACK)
options 	SC_NORM_REV_ATTR=(FG_BLACK|BG_RED)
options 	SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BROWN)
options 	SC_KERNEL_CONS_REV_ATTR=(FG_WHITE|BG_RED)
device		agp		# support several AGP chipsets
options 	VESA
device		dpms		# DPMS suspend & resume via VESA BIOS

# Power management support (see NOTES for more options)
#device		apm
#device		apm_saver	# Requires APM
# Add suspend/resume support for the i8254.
device		pmtimer

# Serial (COM) ports
device		uart		# Generic UART driver

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
#device		re		# RealTek 8139C+/8169/8169S/8110S
device		alc		# Atheros AR8131/AR8132 Ethernet

# Wireless NIC cards
device		wlan		# 802.11 support
options 	IEEE80211_DEBUG	# enable debug msgs
options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options 	IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
options 	IEEE80211_SUPPORT_TDMA #enable TDMA support
device		wlan_wep	# 802.11 WEP support
device		wlan_ccmp	# 802.11 CCMP support
device		wlan_tkip	# 802.11 TKIP support
device		wlan_amrr	# AMRR transmit rate control algorithm
#device		an		# Aironet 4500/4800 802.11 wireless NICs.
device		ath		# Atheros pci/cardbus NIC's
device		ath_hal		# pci/cardbus chip support
options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
device		ath_rate_sample	# SampleRate tx rate control for ath
#device		ral		# Ralink Technology RT2500 wireless NICs.
#device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device		wl		# Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device		loop		# Network loopback
device		random		# Entropy device
device		ether		# Ethernet support
#device		vlan		# 802.1Q VLAN support
#device		tun		# Packet tunnel.
device		pty		# BSD-style compatibility pseudo ttys
device		md		# Memory "disks"
#device		gif		# IPv6 and IPv4 tunneling
#device		gre
#options 	XBONEHACK
#device		faith		# IPv6-to-IPv4 relaying (translation)
device		firmware	# firmware assist module
device		gzip		# Exec gzipped a.out's.  REQUIRES COMPAT_AOUT!

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device		bpf		# Berkeley packet filter

# USB support
options 	USB_DEBUG	# enable debug msgs
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		ehci		# EHCI PCI->USB interface (USB 2.0)
device		usb		# USB Bus (required)